iFetch Automatic Ball Launcher - iFetch Setup Process; Key Setup Safety Warnings

4
SET UP
WARNING
To prevent SERIOUS INJURY:
Ɋ INSPECT for signs of wear,
corrosion, and fatigue
BEFORE each use. DO
NOT use if damaged.
Ɋ DO NOT operate when any
part of the machine is wet or
standing in water. DO NOT
use when raining. An electric
shock hazard may exist if the
unit is plugged in while or aer
it has been exposed to water.
Ɋ DO NOT aempt to modify
your iFetch or any of the
system components
1. Plug the power cord into
the back of the ifetch and
then into the wall. Or, for
baery operation: open
the compartment on the
boom of the iFetch and
install 6 C baeries.
2. Press the buon on the
back of the iFetch and
drop ball in. Your iFetch
is now ready for use.