3
goifetch.com
PARTS LIST
1. Before rst use, use the battery charger to
fully charge the internal battery. Plug the
adapter end into the bottom of the product
and then insert the plug into the wall.
2. Fully charging your battery will normally take
8 hours, but it is best to charge it overnight or
even for a full 24 hours this rst time.
3. Unplug the cord from the bottom of the
machine, and place the iFetch Too where you’d
like to play. For best performance, make sure
your iFetch Too is on a at, level surface.
4. Press the power button to turn on (button
should glow green indicating battery is fully
charged).
5. You’re ready for play!
NOTE: Your iFetch Too will keep throwing balls for
approximately 250 launches on a fully charged battery.
SET UP
• INSPECT for signs of wear,
corrosion, and fatigue BEFORE
each use. DO NOT use if
damaged.
• DO NOT operate when any
part of the machine is wet or
standing in water. DO NOT use
when raining. An electric shock
hazard may exist if the unit is
plugged in while or after it has
been exposed to water.
• DO NOT attempt to modify your
iFetch Too or any of the system
components
WARNING
To prevent SERIOUS INJURY:
A
PART DESCRIPTION
A One (1) iFetch Too
B One (1) Power Cord
C Three (3) Balls (2.5” diameter)
B
C
To Next Page
Loading...
