6. OLED display
7. Headphone 3.5mm Single-Ended socket
3.5mm with TRRS iFi S-Balanced.
8. Headphone gain selection: 0dB/9dB/18dB
Always start from 0dB and then increase the gain level to attain an enjoyable and comfortable level of
volume from the headphones.
Warning: at the outset do not use excessive gain, otherwise damage to hearing or connected headphones
may ensue. AMR/iFi audio is not responsible for any damage/injury from misuse.
9. Headphone 6.3mm socket
10. Balanced 2.5mm headphone socket
2.5mm TRRS Balanced .headphones
if possible, always use balanced headphones to take full advantage of the true balanced nature Tip:
of the Pro iDSD circuitry.
8
To Next Page
Loading...
