ifi Pro iDSD - XLR Balanced Signal Outputs; Single-Ended Signal Outputs; Output Selector: Hifi Fixed;Hifi

11. Analogue Volume Control
At normal listening levels, the volume control should be around the 12 o'clock position. Increase the
gain level to enjoy a higher listening level.
12. Infrared Remote Receiver
Ÿ
Ÿ Window for infrared remote receiver signal.
Rear of Pro iDSD
Analogue Outputs
13. XLR Balanced signal outputs
Balanced signal output to an amplier.
14. Single-Ended signal outputs
Single-Ended signal output to an amplier.
15. Output selector: HiFi Fixed/HiFi Variable/Pro Fixed/Pro Variable
It is possible to set the signal output to different levels for home or studio use. Industry standard
signal output levels apply; balanced output is ~4.6V (HiFi Fixed mode) and ~11.2V (Pro Fixed mode).
Variable is adjusted via the front volume control. With the volume control at maximum the same
signal levels listed above are achieved.
9