EasyManua.ls Logo

ifi ZEN Series - Front Panel Controls

ifi ZEN Series
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Power switch
2. Input channel switch
Input 1: RCA
Input 2: Single-ended 3.5 mm
Input 3: Balanced 4.4 mm
3. . Power Match selection: 0 dB/6 dB /12 dB/ 18 dB
We recommend to start from 0dB and then increase the switchable gain level to attain an enjoyable and
comfortable level of volume from the headphones.
Warning: at the outset do not use excessive gain, otherwise damage to hearing or connected headphones may
ensue. AMR/iFi audio is not responsible for any damage/injury from misuse.
4. . Analogue Volume Control
At normal listening levels, the volume control should be around the 12 o’clock position. Increase the gain level
to enjoy a higher listening level.
5. Single-ended 6.3 mm output
For connecting single-ended 6.3 mm headphones. With single ended 3.5 mm headphones, connect with a 3.5
mm to 6.3 mm adapter.
6. Balanced 4.4 mm analogue output
For connecting balanced 4.4 mm headphones.
Tip: As the Sennheiser HD 6 XX headphones use balanced design, we recommend the 4.4 mm balanced
output.
7. HD 6XX LED
Headphone corrections optimized for Sennheiser HD 6XX headphones.
8. XSpace Matrix LED
The XSpace Matrix(on/off) recreates a holographic sound field.
It is a pure analogue signal processing circuit designed for listening to headphones as if one was listening to
speakers. This addresses the ‘music inside the head’ sensation, which makes for unsettling listening.
Tip: Sonically-hindering DSP is NOT used for HD 6XX nor XSpace Matrix systems. They use the highest-quality
discrete components and operate purely in the analogue domain. Hence all the clarity and resolution of the
original music is retained.
9. Settings
This button chooses between:
Off
HD 6XX
XSpace
10. Balanced 4.4mm analogue input
This is a balanced analogue input.
11. Single-ended 3.5mm analogue input
For connecting single-ended 3.5mm input.
12. . RCA analogue input
This is an analogue input.
13. Balanced 4.4mm analogue output
This is an analogue output via 4.4mm > XLR or other balanced interconnects. You could use this for an active
speaker.
Tip: As the ZEN CAN Signature 6XX is balanced, this is the recommended output.

Other manuals for ifi ZEN Series

Related product manuals