Need help?Do you have a question about the iflo Cascada and is the answer not in the manual?
General| Brand | iflo |
|---|---|
| Model | Cascada |
| Category | Plumbing Product |
| Language | English |
Ensure the pedestal is installed on a flat surface for stability.
Position the pedestal and mark the floor through its mounting holes.
Drill holes according to floor type: 10mm deep for concrete, 4mm for wood.
Insert plastic plugs into drilled holes for concrete floors.
Fasten pedestal using screws, washers, and wall plugs.
Drill two 12mm holes into the wall to a depth of 60mm.
Insert plastic wall plugs into the drilled holes.
Screw fixing bolts into wall plugs until they contact the wall.
Align the basin's bolt holes with the protruding fixing bolts.
Place and screw plastic nuts onto fixing bolts clockwise.
Secure the basin by tightening the plastic flanged nuts.
To Next Page
