IFM AL1340 - Page 26

IO-Link Master with Modbus TCP Interface DataLine 4 Ports IP 65 / IP 66 / IP 67
26
>
9.1.1 Remarks
Content
Offline parameter setting ........................................................................................................................26
Parameter setting with LR DEVICE ........................................................................................................26
34180
>
Offline parameter setting
34060
The AL1340 supports the offline parameter setting. In this context, the user creates and stores a
configuration for the IO-Link master and the connected IO-Link devices without being connected to the
AL1340 (OFFLINE mode). The configuration created in this way can be stored as a file (*.lrp) and
loaded to the AL1340 and activated at a later date.
Further information about offline parameter setting: → Operating instructions LR DEVICE
>
Parameter setting with LR DEVICE
34437
Parameter setting of the AL1340 with the LR DEVICE is only possible via the IoT interface X23.