IFR Systems FM/AM-1200S/A User Manual

FUNCTION I RS-232 COMMAND I DESCRIPTION
TONE FORMATS REM
I Sets FM/AM-1200S/A to Remote.
Programs DTMF Phone
#.
n =
Memory Location fl to 15
x
=
Up to 16 digits (p-9,A,B,C,
D, #, or *)
Programs and executes DTMF Phone #
specified by Memory Location 0.
x = Up to 16 digits (9-9,A,B,C,
D, #, or *)
DTMn?
or
DTMFn?
Displays DTMF Phone # in Memory
Location n on VFD.
n
= 9 to 15
DTMFn
Executes DTMF Phone # specified by
Memory Location n.
n
= fl to 15
Sets
FM/AM-1200S/A to DTMF Encode
operation and returns DTMF value
displayed on VFD after reception.
(FM/AM-1200S/A must be set to
Receive Mode and correct RF
Frequency must be executed.)
Programs PULSE Phone
#.
n = 9 to 15
x
= Up to 16 digits (9-9,A,B,C,
D, #, or *)
Table 4-13 RS-232 Remote Commands (Continued)
PUL=x
or
PULS=x
or
PULSEn=x
PULn?
or
PULSn?
or
PULSEn?
Programs and executes PULSE Phone
# specified by Memory Location p.
x = Up to 16 digits (9-9,A,B,C,D,
#, or *)
Displays PULSE Phone # in Memory
Location n on VFD.
n
= fl to 15

IFR Systems FM/AM-1200S/A Specifications

General

Brand	IFR Systems
Model	FM/AM-1200S/A
Category	Monitor
Language	English