IFR Systems FM/AM-1200S/A User Manual

FM/AM-1200S/A communication with an external controlling device
requires use of the allowable GPIB command formats listed in Table 5-7.
COMMAND
FUNC=VALUE
(CR or Colon)
Func (nn) =Val ue*
FUNC (CR or Colon)
Func (nn)
(CR or Colon)
j
AFFlO?
Displays value of
Tone Generator
memory location 10.
DEFINITION
Sets memory location
0 of
selected function to value
selected and executes
it.
Programs memory location
(0 to 15) of selected
function to value selected.
Does not execute function.
FUNC
(nn)?*
* FUNC = AFF, DPX, DCS, DTM, DTMF, MTR1, MTR2, PUL, PULS,
PULSE, RFF or WAV.
(nn)
= function preset number (0 thru 15).
Linefeed, Carriage Return or Colon
= terminates command
Value
= function command value field.
EXAMPLE
AFF=12345.6
Sets Tone Generator
memory location
0
to 12345.6 Hz and
executes
it.
RFF6=345.666
Programs RF
Frequency memory
location 6 to
345.6666 MHz.
Executes value of selected
function stored in memory
location
0.
Executes value of selected
memory location
(0 to 15)
of selected function.
Table 5-9 GPIB Command Format
DTMF:
Executes value
stored in DTMF
memory
1 ocati on 0.
PULSE 12:
Executes value
stored in memory
location 12 of the
PULSE function.
Displays on VFD the value
of selected memory
1 ocation
(0 thru 15) of the selected
function.
RFFZ?
Displays value of
RF memory
1 ocat i on
2.

IFR Systems FM/AM-1200S/A Specifications

General

Brand	IFR Systems
Model	FM/AM-1200S/A
Category	Monitor
Language	English