6
OPERATING INSTRUCTIONS
Before rst use, please wipe all the parts with a soft, damp cloth and dry
thoroughly.
Do not immerse the vacuum in any liquid.
Assembly
Step 1: Insert the handle into the body, and rotate the screw to secure.
Step 2: Place the dust container onto the machine and push until it clicks into
place.
Step 3: Insert one end of the hose into the oor brush and rotate clockwise to
join. Then insert the other end into the body of the machine.
Step 4: Insert the crevice brush into the machine.
Note: Make sure all parts are rmly attached otherwise suction may be
reduced.
To Next Page
Loading...
