8
CLEANING AND MAINTENANCE
Before emptying the dirt container, cleaning the sponge or cleaning the dust lter,
ensure the vacuum is either off or the plug is disconnected. It is advised that the
cleaning is undertaken outdoors.
Step 1: Press dust container release button to remove the dust container.
Step 2: Hold the dust container over a bin and unclip the lock at the base,
allowing the dust to fall out.
Step 3: Close the base of the dust container. Align the base back onto the
machine and push so that it clicks back into place.
Emptying and Cleaning the Dust Container
WARNING: The plug must be removed from the power socket before any
maintenance or replacement. If the power cord is damaged, it should only be
replaced by a maintenance centre or similarly qualied persons.
To Next Page
Loading...
