9
Cleaning the Sponge
Keeping the sponge clear of dust and dirt will preserve the suction of the
machine and so will prolong its lifespan.
Step 1: Pull open the dust container by lifting the lock on the handle.
Step 2: Rotate the lter to remove.
Step 3: Separate the lter so that you have the sponge and the HEPA.
Step 4: Gently knock the sponge repeatedly over a bin to release the dirt.
Step 5: Wash the sponge and HEPA under running water (40°C max).
Step 6: Leave to fully dry for at least 24 hours before placing back in the machine.
WARNING: Do not use detergent to clean the sponge. The
sponge must be air dried – never use external heat sources. Do
not wring the sponge otherwise it can be damaged.
24hr
To Next Page
Loading...
