EasyManua.ls Logo

iGenix IG355W - Installation; Location and Air Circulation Requirements; Door Reversal Procedure

iGenix IG355W
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Location and Air Circulation
The appliance must stand vertically on a at, even surface, to level the appliance turn
levelling feet until the appliance is as level as possible.
This appliance has been designed to operate in ambient temperatures between 16°C
and 38°C.
It is not recommended to place this appliance in a room where the temperature is
likely to drop below 0°C for prolonged periods, as the internal appliance temperature
will not be maintained.
The appliance should not be placed near to sources of heat e.g. cookers, radiators,
direct sunlight or in any unheated rooms e.g. garages, or outhouses, as extreme
temperatures will affect the performance of your appliance.
Do not expose the appliance to damp conditions, open air or rain.
Do not lift the appliance by the pipes or the door when moving.
It is not recommended to place the appliance in a wall recess, tted cabinet or
furniture as this will not allow adequate ventilation and cause a potential re hazard.
Allow 25mm of clearance space at the sides of the appliance and 20mm above the
appliance.
It is not recommended to place the appliance directly against the wall, allow at least a
15mm clearance space at the rear.
Do not place the appliance in a wall recess, tted cabinet or furniture as this will not
allow adequate ventilation and cause a potential re hazard.
Providing you follow the recommended ventilation requirements you will:
Increase the life of the appliance.
Minimise the risk of condensation on the outside of the appliance.
Minimise operating noises caused by vibration.
Reverse the door
The appliance door can be tted to open to either the left or the right depending on its
location. The appliance will have to be tilted and supported in order to carry this out. It
is advisable to get some help during this procedure.
Important: Do not lay the appliance at as this may damage the coolant system. Take
care when tting and tightening screws.
INSTALLATION

Related product manuals