Need help?Do you have a question about the Igloo FRF434 and is the answer not in the manual?
Remove all packaging material and inspect for damage before powering on the freezer.
Ensure the freezer is placed on a strong floor and not tilted more than 45 degrees during movement.
Install in a location with proper air circulation, maintaining recommended clearances around the unit.
Ensure a suitable 115V, 15A grounded outlet. Avoid adapters and ensure proper grounding.
Avoid extension cords; if necessary, use a 3-wire grounded cord with a rating equal to or greater than the appliance.
Install in a well-insulated location, away from heat sources, and on a level surface.
Plug into a 115V/15A outlet, turn on power, set temperature dial, and allow 24 hours for initial cooling.
Features adjustable temperature dial (1-7, 0=off) and requires 24-hour wait after tilting before plugging in.
Unplug before cleaning. Use a baking soda solution; avoid harsh chemicals. Clean door gaskets regularly.
To Next Page
General
