English
1 Important notes
Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual
in order to ensure that you install, use, and maintain the product properly at all times. These instructions MUST stay with this
product.
By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you
understand and agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the in-
tended purpose and application and in accordance with the instructions, guidelines, and warnings as set forth in this product
manual as well as in accordance with all applicable laws and regulations. A failure to read and follow the instructions and
warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property
in the vicinity. This product manual, including the instructions, guidelines, and warnings, and related documentation, may be
subject to changes and updates. For up-to-date product information, please visit documents.dometic.com.
2 Related documents
Find the full operating manual online on qr.dometic.com/be44YP.
3 Safety instructions
DANGER! Electrocution hazard
On boats: If the device is powered by the mains, ensure that the power supply has a
residual current device (RCD), a residual current circuit breaker (RCCB), or a ground fault
circuit interrupter (GFCI). Installation, especially in potentially damp areas, must be in ac-
cordance with all applicable installation regulations.
Do not touch exposed cables with your bare hands. This applies especially when operat-
ing the device from the AC mains.
Before starting the device, ensure that the power supply line and the plug are dry.
WARNING! Explosion hazard
Do not store any explosive substances such as spray cans with a flammable propellant in
the cooling device.
WARNING! Elecotrocution hazard
Do not operate the cooling device if it is visibly damaged.
If the cooling device's power cable is damaged, it must be replaced with a suitable power
cable or assembly available from the manufacturer or its service agent to prevent safety
hazard.
This cooling device may only be repaired by qualified personnel. Improper repairs can
lead to considerable hazards.
Plug the device to sockets that ensure proper connection especially when the device
needs to be earthed.
3
To Next Page
Loading...
