WARNING! Fire hazard
When positioning the cooling device, ensure that the supply cord is not trapped or dam-
aged.
Do not locate multiple portable socket-outlets or portable power supplies at the rear of
the device.
In the event of any damage to the refrigerant circuit:
• Keep open flames and potential ignition sources away from the cooling device.
• Ventilate the room well.
• Switch off the cooling device.
For cooling devices with R600a refrigerant: The refrigeration circuit contains a small
quantity of an environmentally friendly but flammable refrigerant. It does not damage the
ozone layer and does not increase the greenhouse effect. Any leaking refrigerant may
ignite.
Keep the ventilation openings on the device housing or in installations free of obstruc-
tions.
Do not use any mechanical objects or other means to speed up the defrosting process,
unless they have been recommended by the manufacturer for this purpose.
Do not open or damage the refrigerant circuit.
Do not use electrical devices inside the cooling device unless they are recommended by
the manufacturer for that purpose.
WARNING! Health hazard
This cooling device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the cooling device by
a person responsible for their safety.
Children must be supervised to ensure that they do not play with the device.
Cleaning and user maintenance must not be carried out by unsupervised children.
CAUTION! Electrocution hazard
Before starting the cooling device, ensure that the power supply line and the plug are
dry.
Disconnect the cooling device from the power supply
• Before each cleaning and maintenance
• After every use
CAUTION! Health hazard
To avoid contamination of food, observe the following instructions:
• Check if the cooling capacity of the cooling device is suitable for storing the food to be
cooled.
• Food may only be stored in its original packaging or in suitable containers.
• Opening the cooling device for long periods of time can cause significant increase of
the temperature in the compartments of thedevice.
• Clean regularly surfaces that can come in contact with food and accessible drainage
systems.
If the cooling device is left empty for long periods:
• Switch off the cooling device.
• Defrost the cooling device.
4
To Next Page
Loading...
