MORE HEAT. LESS WASTE.
QUICK START
BATTERY NOT INCLUDED
Requires 12V 4A power supply
5.5 x 2.1 Barrel12V Car plug
1. CONNECT TO BATTERY
2. PRESS & HOLD ‘ ’ BUTTON
Press and hold for 3 seconds for
welcome screen to display IGNIK.
3. CONTROL HEAT LEVEL
Use ‘+’ and ‘-’ buttons to adjust heat
from 10-100 (Increments of 10).
4. AUTOMATIC SHUT-OFF
Quick press Triangle Button and adjust
auto-shutoff time using +/- buttons.
Adjustable from 1-10 Hrs.
1-10 Hour Auto
Timer Shut-Off
Display
Screen
Press & Hold
ON/OFF &
Set Timer
Heat Level
Adjustment
+/-
It is recommended to start by setting heat level to 60,
wait 5 minutes and adjust to desired heat level from
there. Product will begin to heat up immediately, but
can take 5-10 minutes to reach its maximum level.
For best results connect to 12V vehicle power system
or portable power station. 250-300Wh are required
for one full-night of use.
To Next Page