ignik TOPSIDE HEATED BLANKET - Directions for Use

WWW.IGNIK.COM
DIRECTIONS FOR USE
1. Connect the Vehicle Adapter (Car
Plug) to a 12V auxiliary power supply
output rated for 48W or higher,
12V==4A. A dual battery power
system is recommended to prevent
draining of the starting battery.
2. Alternatively, connect the Vehicle
Adapter or 5.5 x 2.1 barrel to a
compatible Portable Power Station
or Solar Generator. Set output
to 12V (where applicable). We
recommend power supplies with a
minimum capacity of 250-300Wh
for a single night of sleep.
3. Press and hold TRIANGLE ON/OFF
button for 3 seconds until screen
powers on and reads IGNIK.
2
3
1