6 www.iGOelectric.com
DISPLAY & FUNCTIONS
The battery must be in the ebike for the display to function.
Make sure that the battery is locked into the battery rack.
It is not necessary to keep the key in the lock while riding
Turn the power on by pressing the ‘MODE’ Button for 2 seconds.
BUTTONS
‘MODE’ : Powers ebike ON/OFF, Toggles through display modes
‘PLUS’ : Pedal assist level up, Turns on lights when held for 2 seconds
‘MINUS’ : Pedal assist level down, Walk assist when held
Electric system display and control unit
To Next Page
Loading...
