9www.iGOelectric.com
DISPLAY & FUNCTIONS
CONTROLS (Cont’d)
Lighting
With the ebike’s power on , hold the ‘PLUS’ button for 2 seconds to turn on the lighting
system. This will turn on the backlight for the display, as well as the front and rear
lights. Holding the ‘PLUS’ button for 2 seconds again will turn the lighting system off.
NOTE: The lighting system is powered through the ebikes lithium battery pack
Walk Assist
Hold down the ‘MINUS’ button to initiate walk assist mode. The bike will
move at a steady pace of 6km/h until the ‘MINUS’ button is released.
ATTENTION! DO NOT TEXT WHILE RIDING.
Control unit and throttle located on left handlebar
To Next Page
Loading...
