iHealth Lina - User Manual

Questions and Answers

L
Lisa ThomasJul 27, 2025
What to do if iHealth Lina display shows “Er 1.”?
- M
  munozjessicaJul 27, 2025
  If your iHealth Scales display shows “Er 1,” it means the maximum weight has been exceeded. Note that the maximum weight allowed is 400 lb/180 kg.
N
Nicholas LiuJul 31, 2025
What to do if iHealth Scales bluetooth icon on the display won’t stop flashing?
- H
  hendersonwilliamJul 31, 2025
  If the Bluetooth icon on your iHealth Scales display won’t stop flashing, it indicates that the Bluetooth connection failed. To resolve this, ensure that Bluetooth is enabled, the Scale is turned on, and the app is running. If the issue continues, restart your mobile device and try again.
M
Michael RushAug 4, 2025
What to do if iHealth Scales display shows “Er 2.”?
- A
  Ashley MedinaAug 5, 2025
  If your iHealth Scales display shows “Er 2,” it means the Scale can’t capture a steady reading. Here’s what you should do: 1. Allow the Scale to shut off completely before trying again. 2. Place your feet on the center of the glass platform and stand still.
G
Gloria GarciaAug 8, 2025
What to do if iHealth Lina display shows “Lo.”?
- A
  Austin WellsAug 9, 2025
  If your iHealth Scales display shows “Lo,” it indicates that the battery level is low. You should change the batteries.
E
Elizabeth LewisAug 13, 2025
What to do if iHealth Lina Scales display shows “Er 4.”?
- H
  Hannah SnyderAug 13, 2025
  If your iHealth Scales display shows “Er 4,” it indicates a Bluetooth connection error. You can reset the Bluetooth connection by turning it off and on in your mobile device settings.
M
Maria TaylorAug 17, 2025
What to do if iHealth Lina Scales display shows “Er 0.”?
- P
  Paul DavisAug 17, 2025
  If your iHealth Scales display shows “Er 0,” it means that the Scale failed to initialize. You can fix this by removing the batteries, waiting for one minute, and then reinstalling them.
M
megan48Aug 21, 2025
What to do if iHealth Scales display shows “Er 9.”?
- N
  Nancy TaylorAug 21, 2025
  If your iHealth Scales display shows “Er 9,” it indicates a scale memory access error. To resolve this, remove the batteries, wait one minute, and then reinstall them.