MAINTENANCE 9VX3
LONG TERM STORAGE
Before Storage
To protect the cylinder rods, set the machine position in the right
illustration.
(To prevent the cylinder rods from being rusted )
To store the machine from long term, follow the next procedures.
• Clean parts of the machine and store indoors.
If you have to place the machine outdoors, choose a flat place
and cover the machine.
• Be sure to perform fill the fuel, lubrication, and oil change.
• Apply grease on the exposed part of the hydraulic cylinder piston
rods.
• Store the battery after move the negative terminal and covering it
or dismounting the battery from the machine.
• Lock the control levers and pedals with the lock lever and pedal
lock.
Bucket position at the time of
long term storage.
During Storage
AWARNING
If you have to operate the machine indoors to prevent rust,
keep good ventilation and gas poisoning by window or entrance.
During storage, operate the machine once a month to maintain
films of oil at the lubrication section and charge the battery at the
same time.
■ After Storage
After long term storage, follow the next procedures before operating
the machine.
• Wipe away grease on the hydraulic cylinder rods.
• Be sure to perform fill the fuel and lubrication.
4-12-1
To Next Page
Loading...
