iHome 5 - Security Caution; Specifications; Troubleshooting

SECURITY CAUTION
 Use standard rechargeable battery only. Using other type of battery may cause damage.
 Handle with care to prevent damage caused by dropping.
 To prevent hardware damage, do not press hard on the indoor LCD lens, outdoor camera lens or outdoor PIR sensor
(black ball shape).In case of LCD or broken lens avoid eye contact with crystal liquid.
 Do not put the product in place with high temperature/humidity/strong dust/salty fog/rain to prevent product damage.
 Micro SD card and SIM card should be inserted before the device is powered on. The card will not be recognized if the
device is powered on firstly.
 Handle indoor monitor installation with care. Pulling hard on the FPC cable may cause damage and will not be covered by
warranty.
 The pictures in this manual are for reference only. Detailed information please refer to the final product.
 The information contained in this manual is subject to change without notice.
SPECIFICATIONS
 Operating system: Android 4.4.2
 CPU: Dual core 1.2GHz ARM v7
 Wi-Fi: 2.4GHz IEEE 802.11b/g/n
 App: Android & iOS App
 Peephole diameter: 15mm ～ 58mm
 Peephole length: 35mm ～ 120mm
 Build-in battery: 12000mAh lithium-ion
 Working voltage: 4.2V
TROUBLESHOOTING
 Charge up the device if indoor monitor restarts frequently, it may be caused by a low power.
 Power off the device and re-insert the micro SD card, or insert another micro SD card if a “Please insert Micro SD Card”
or “Parameter error” indication appears after SD card is installed.
 Indication of “Device is not ready” when pressing “Outdoor” button may be caused by an unconnected FPC cable with
indoor monitor. Try to reconnect it.