To Next PageTo Next PageWhat to do if my iHome Speaker System doesn't respond or has no sound?
If your iHome Speaker System isn't responding or you're not getting any sound, first, try adjusting the volume on both the unit and your audio device. Also, ensure that the unit is properly paired with your device by checking if 'iHome iAV14' appears in your device's Bluetooth menu.
Why is my iHome Speaker System not turning on?
If your iHome Speaker System isn't turning on, the AC adapter might not be correctly plugged into a working wall socket or properly connected to the unit. Ensure the AC adapter is plugged into a functioning wall socket and that the AC cable is securely plugged into the DC jack on the unit. Also, check that any wall switch controlling the outlet is switched ON.
What to do if iHome Speaker System sound is distorted?
If the sound from your iHome Speaker System is distorted, the original sound file (like an MP3) might be old or of poor quality. Distortion and noise are more noticeable with high-power speakers. Consider upgrading the file from a trusted source, such as iTunes.
How to fix erratic performance and no sound on iHome Speaker System?
If you're experiencing erratic performance or no sound from your iHome Speaker System, here are a few things to try: * Move the unit away from potential sources of external interference like computers, modems, wireless devices (routers), or fluorescent lights. * Check the volume levels. If the volume is too low, turn it up on both the unit and your device. If the volume is too high, turn it down on the unit and your device.
General| Brand | iHome |
|---|---|
| Model | iAV14 |
| Category | Speaker System |
| Speaker Type | Portable Bluetooth Speaker |
| Connectivity | Bluetooth |
| Charging | USB Charging |
| Water Resistance | No |
| Power Source | AC Adapter |
| Features | Alarm Clock |
Unit ships with items. Check for presence.
Configure smart button preferences in the iHome AVS app. Play/Pause audio if not configured.
Press to mute microphone. Alexa Light Bar turns red when mute.
Features far field voice recognition. Trigger Alexa by tapping.
Cycle display dimmer settings (High, 3, 2, 1, OFF). Snooze alarm.
Enter Bluetooth mode, pair devices, answer/end calls.
Adjust volume levels up or down.
Displays PM indicator on the device.
Visual indicator for Alexa's attention states.
Connect USB cable to charge devices while unit is connected to AC power.
Plug AC adapter into DC jack and then to wall outlet.
Disable Protected Management Frames if router has it enabled.
Establish communication between unit and Bluetooth device. Stream audio wirelessly.
Turn on Bluetooth, make device discoverable, press Bluetooth button, select 'iHome iAV14' on device.
Unit auto-links to paired devices. Press Bluetooth button for 10s to clear/reset.
Manually play music using smartphone controls. Adjust speaker/device volume.
Unit must be paired with phone. Answer/ignore/end calls using Bluetooth Button.
Download iHome AVS and Amazon Alexa apps. Follow instructions for setup and Wi-Fi connection.
Connect Amazon account to enjoy Alexa voice capability.
Configure Smart Button, Stream audio, Update firmware via the app.
Use voice commands to set alarms. Adjust via Alexa voice or the Alexa app.
Details about tone alarms and music alarms.
Press Alexa Button to stop or Snooze Button to snooze tone alarms.
Ask Alexa to set an alarm with music streaming service.
Say 'Alexa, stop' to disable or 'Alexa, snooze' to snooze music alarms.
Adjust maximum alarm volume via iHome AVS app settings.
Alexa Light Bar state indicating the unit is listening.
Alexa Light Bar state indicating the unit has finished listening.
Alexa Light Bar state indicating the unit is processing a request.
Alexa Light Bar state indicating the unit is providing a response.
Alexa Light Bar state indicating the microphone is muted.
Alexa Light Bar state indicating an error condition.
Alexa Light Bar state indicating a notification is available.
Periodically receive and install firmware updates over the air via Wi-Fi.
Do not unplug the unit during a firmware update to prevent damage.
Guidelines for placing, protecting, and cleaning the unit.
Clean with soft cloth and mild soap/water.
Check AC adapter connection and outlet.
Check power, pairing, and volume settings.
Move unit away from sources of external interference.
Adjust volume or check original sound file quality.
Move unit closer to the router.
Equipment complies with FCC RF radiation exposure limits for uncontrolled environments.
Industry Canada compliance and license-exempt RSS statements.
Do not use unit near water or in wet environments.
Ensure proper ventilation by not blocking openings or placing in confined spaces.
Keep unit away from heat sources like radiators or stoves.
Use only provided adapter. Route cables to avoid damage.
Prevent objects from falling into or liquids from spilling into vents.
Unplug during storms or long periods of non-use to prevent damage.
Do not overload wall sockets or extension cords to prevent fire/shock risk.
Seek qualified service for damage. Do not attempt unauthorized servicing.
Keep unit away from sensitive electronic devices due to speaker magnets.
