7
Pairing with a Different Device
When you power ON the speaker, it will automatically link with the previously paired Bluetooth device
if that device is still within range (about 33 feet). To pair with a different device follow steps 1 - 4 under
”Pairing Your Device” on previous page.
Playing Audio Via Bluetooth
1.
Press and hold the
Power
Button for 2 seconds
to turn on the unit. The status indicator will glow solid
blue when a linked device is in range and detected. You can then listen to audio streamed wirelessly
from your paired Bluetooth device.
2. Press the Play/Pause Button to play audio from your device. Press again to pause play and once
more to resume play. When Bluetooth audio is active, the status indicator will glow solid blue.
3. Use menu and track controls on your Bluetooth device to navigate tracks.
4. Press the – or + Button to adjust the iBT82 volume. The LED will flash 3X when minimum or maximum
volume is reached. You can also adjust volume on your device.
5. When done listening, press and release the Power Button to turn the unit OFF. Remember to turn
off your device, too.
Speakerphone Operation
NOTE: The unit must be powered and linked to a Bluetooth phone to receive a call.
1. When a call is received, playing music is muted to hear the ring tone. Press the Speakerphone
Button to answer or end the call, or press and hold it to ignore the call.
2. For call waiting functions, press the Speakerphone Button to answer a second incoming call or to
switch between active calls. Press and hold the Speakerphone Button to end an active call and
return to the other call.
Using the iBT82
To Next Page
Loading...