8
Unit doesn’t respond (no power)
• Check that unit is fully charged.
• Make sure your device is properly paired with the iBT82.
• Make sure the Power is ON.
Unit doesn’t respond (locked up or frozen)
If the unit does not respond, insert the end of a paperclip or similar into the Reset Button located under
the waterproof cover to reset the unit.
Trouble pairing device/computer with iBT82
Bluetooth implementation varies depending on your device’s hardware and operating system. Please see
our website for updates on pairing.
• Make sure you have the latest firmware for your device.
• Make sure your device is working properly. Check your device’s manual for details on Bluetooth
pairing and linking.
• When you power ON the speaker, it will automatically link with the last previously paired Bluetooth
device if the device is still within range (approx.33 feet). To pair with a different device press and hold
the Bluetooth Pairing Button for 2-3 seconds.
For further information and to see the latest instructions, visit www.ihome.com/support
Troubleshooting
To Next Page
Loading...