iDM8
Using the
Charging the Unit
1. Connect the micro USB plug to the micro USB
charging port on the back of the unit.
2. Connect the standard USB plug end of the
cable to a power USB port on a computer
or other USB charging device. For first time
use, charge unit for about 8 hours.
3. A green light flashes while the unit is
charging and glows steadily when unit is
fully charged. If unit is not
powered on when micro USB plug is
connected, the green light flashes once to
indicate unit is charging.
3
P7
NOTE: When unit is on and not connected
to power source, flashing green light
indicates battery needs charging.
USB 2.0
To Next Page
Loading...
