What to do if iHome2GO iH 26 Docking Station doesn’t respond?
If your iHome2GO Docking Station isn't responding, ensure the AC adapter is properly plugged into a functioning wall outlet and connected to the power supply jack on the back of the unit. To verify the outlet's functionality, plug another device into it.
Why my iPod does not dock properly on iHome2GO Docking Station?
If your iPod isn't docking properly with the iHome2GO Docking Station, first, ensure you're using the correct dock insert for your specific iPod model. Also, remove your iPod, inspect the connectors on both the dock and your iPod for any obstructions, and then carefully reseat it.
What to do if my iHome2GO iH 26 Docking Station batteries are weak?
If the batteries in your iHome2GO Docking Station are weak or dead, replace them with new batteries.
What to do if my iPod is not installed properly in iHome2GO iH 26?
If your iPod is not installed properly in the iHome2GO Docking Station, remove your iPod from the dock and check for any obstructions on the connectors, both in the dock and on your iPod. Then, reseat the iPod in the dock.
Why isn't my iHome2GO iH 26 turning on?
If your iHome2GO Docking Station isn't turning on, make sure the AC adapter is properly plugged into a functioning wall outlet and that the connector is securely plugged into the power supply jack on the back of the unit.
General| Brand | iHome2GO |
|---|---|
| Model | iH 26 |
| Category | Docking Station |
| Language | English |
To Next Page
