ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
HOW TO USE THE STAND
Install the Stand on a stable surface. The monitor may cause injury or damage if
it falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
The monitor is the design that a stand rotate.Be sure to rotate the stand before opearating the
monitor, and rotate the stand upward before you re-box the monitor.
HOW TO USE THE STAND
CAUTION
1. Lay the monitor flat on a table with front face down (see Fig 1). Put a piece of soft
cloth on the table beforehand to prevent the monitor from being scratched.
2. Unpack the stand and mount it onto the monitor base with aligning it to the hook
(see Fig 2).
3. Slide the stand upward until it makes a click sound, indicating it is fixed (see Fig 3).
4. Stand the monitor up (see Fig 4).
(Fig 4)
(Fig 1) (Fig 2)
(Fig 3)
To Next Page
Loading...
Need help?
General