ENGLISH
14 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 31. You are also able to adjust the picture by following the button
operation shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS.
Press the ENTER Button to start the On Screen Display
feature. There are additional Menu items which can be
switched by using the
/ Buttons.
Select the Menu item which contains the adjustment icon
relating to the adjustment you want to make. Press the
ENTER Button. Then, use the
/ Buttons to highlight the
desired adjustment icon.
Press the ENTER Button again. Use the / Buttons to
make the appropriate adjustment or setting.
Press the EXIT Button to leave the menu, and the settings
you just made would be automatically saved.
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Time Out has passed. Also, press the EXIT button to quickly turn off the On-
Screen Display.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
Turning off the power should be avoided while using the Menu.
Adjustments for H. / V. Position, Pixel Clock and Phase are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
NOTE
For example, to correct for vertical position, select Menu item of Image Adjust and then press
the ENTER Button. Then, select V.Position by using the
/ Buttons. An adjustment page
appears after you press the ENTER Button.
Then, use the
/ Buttons to change the vertical position settings. The vertical position of the
overall display should be changing accordingly while you are doing this.
Press the EXIT Button lastly, it ends, all changes are saved in the memory.
Main Menu
Picture Adjust
Color Adjust
Setup Menu
Language
Reset
Image Adjust
Input Select
Audio Adjust
Display Information
Main Menu
Picture Adjust
Color Adjust
Setup
Language
Reset
Input Select
Audio Adjust
Display Information
Image Adjust
Clock
Phase
H. Position
50
50
50
4
V. Position
Image Adjust
Sharpness
3
Video Mode Adjust
Full Screen
Auto Adjust
Image Adjust
V. Position
50
To Next Page
Loading...
Need help?
General