English
13
Troubleshooting
iRig Mic Field does not activate when plugged into my iOS device
Verify that you’re using a compatible device.
Disconnect and re-connect iRig Mic Field to verify that you have securely connected iRig Mic Field to the iOS device.
Sound is distorted.
Check that the input level on iRig Mic Field has been set properly. If the RED LED is lighting when you record on iRig
Mic Field, decrease the input level as described in this guide.
The iRig Mic Field status LED is always dark blue and I don’t get any sound.
In order for iRig Mic Field to turn ON, a Core Audio-compatible audio app must first be launched on your iOS device.
Be sure you are using an app that works with the digital audio input from the Lightning dock connector.
Specifications
- Digital stereo field recording microphone
- Transducer type: Condenser, electret
- Polar Patterns: Cardioid
- Capsules configuration: Near coincident pair
- Frequency Response: 40Hz - 20kHz
- Max SPL: 115dB SPL
- Resolution & Sample Rate: 24 bit, 44.1kHz and 48kHz
- Gain range: 48dB
- Power: Powered by the connected iOS device
- Connector: Lightning connector
- Rotation system: 90° for optimal audio/video positioning and locks in place
- Controls: Gain thumbwheel and multicolor LED indicator
- Audio connections: 3,5mm headphone output jack
- Size: 57,5mm (H) x 50mm (W) x 16mm (D)
Warranty
Please visit:
www.ikmultimedia.com/warranty
for the complete warranty policy.
Support and more info
www.ikmultimedia.com/support
www.irigmicfield.com
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
To Next Page
Loading...
Need help?
General
