EasyManuals Logo

iKarus C42C Maintenance Manual

Default Icon
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
COMCO IKARUS
Maintenance Manual C42 Series
MaintenanceManual C42-
Series_Issue_VII_18.02.2014.doc
Revison No.:1 63 from 107
No. Description
Inspection
Ref.
Chapter
Signature
every
50
hours
very
100
hours
165 Check condition and functionality of cabin locks
x x
166 Check condition and functionality of ventilation window
x x
167
168 Empennage
169 Horizontal tail
170 Check condition of horizontal tail struts and for secure fitting
x x
171
Visual inspection of the condition of the horizontal tail fin and of the
elevator
x x
172 Check horizontal tail fin for secure fitting
x x
173 Visual inspection of safety screws in the horizontal tail fin attachment
x x
174
Check condition, secure fitting, play and security of elevator hinges
(fork joints), in particular wear of the eye-bolts and bolts
x x
175 Clean, grease and secure fork joints
x
176
Check elevator control horn for damage, in particular for cracks in the
welded connection, and for secure fitting
x x
177 Check freedom of movement of the elevator
x x
178
Check condition and freedom of movement of the elevator push-rod
rod ends; with the elevator in full deflection, check counter nuts for
secure fitting
x x
179
Check counter nuts for proper torque and that they are properly
installed
x x
180
Clean, grease and secure rod ends and check for play; tighten and
secure the counter nuts with Loctite; secure rod end with counter nut
x
181
Check condition, security and attachment of elevator reversal
bellcrank (on top of fuselage tube); in particular, check screws in the
bearing block, fittings and rivets; observe service bulletin
x x
4.3.6.3
182
Check elevator reversal bellcrank for security, wear and freedom of
movement; wash out and grease journal bearings
x
183 Check attachment of push-rod to control stick
x x
184 Trim tab
185 Check trim tab functionality and deflection (cf. setting data)
x x
186
Visual inspection of condition and attachment of tab, control horn and
control rods
Note:
The bearing "rod-control horn" used in the design prior to 2004 can
wear out. Retro-fit new construction as required
x x

Table of Contents

Other manuals for iKarus C42C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the iKarus C42C and is the answer not in the manual?

iKarus C42C Specifications

General IconGeneral
BrandiKarus
ModelC42C
CategoryAircrafts
LanguageEnglish

Related product manuals