COMCO IKARUS
Maintenance Manual C42 Series
MaintenanceManual C42-
Series_Issue_VII_18.02.2014.doc
Revison No.:1 64 from 107
No. Description
Inspection
Ref.
Chapter
Signature
every
50
hours
very
100
hours
187 Electrical trim tab
188
Check functionality and the connections for secure fitting (insofar as
they are accessible, cf. circuit diagram)
x x
189 Mechanical trim tab
190
Check function, condition and attachment of the Bowden cable; if stiff,
oil using an injection syringe or replace
x x
191 Check counter nuts of the Bowden cable adjusting screws
x x
192 Vertical tail
193 Visual inspection of the condition of vertical tail fin and rudder
x x
194 Check vertical tail fin for secure fitting
x x
195
Check guide bushing of forward and aft vertical tail attachment in
fuselage tube for play; replace, if necessary
x
196 Check condition of rudder hinges (fork joints)
x x
197 Clean, grease and secure fork joints and check for play
x
198 Check freedom of movement of rudders
x x
199
Check cables and Bowden cables for secure attachment, correct
routing, damage, wear and tension; adjust and grease as required
x x
200 Check counter nuts of the Bowden cable adjusting screws
x x
201
202 Interior / Cockpit
203 Battery
204
Visual inspection of wires, connections and wire routing for integrity
and security insofar as accessible
x x
205 Visual inspection of attachment
x x
206 Check that battery is charged, recharge if necessary
x x
207 Instrument panel
208
Check condition and attachment of instrument panel (attachment
clips)
x x
209 Check attachment of each individual instrument
x x
210
Check functionality of control elements:
- choke
- cabin heating
- carburettor heating
x x
211 Pitot-static pressure system
212
Visual inspection of condition and attachment of pitot tube on the left
wing
x x
213 Check system for leaks
x x
4.3.8
To Next Page
Loading...
Need help?
General
