IKEA 904.756.16 - Filter and Spray Arm Maintenance

Cleaning the lters
1
Make sure that there
are no residues of
food or soil in or
around the edge of
the sump.
2
C
B
A
The lter system is
made of three parts.
3
To remove lters (B)
and (C), turn the
handle
counterclockwise
and pull it upwards.
Remove the lter (C)
out of lter (B).
Wash the lters with
water.
4
Remove the at lter
(A). Wash the lter
with water.
5
D
Put the at lter (A)
back in place. Make
sure that it is
correctly positioned
under the 2 guides
(D).
6
Reassemble the
lters (B) and (C). Put
them back in the
lter (A). Turn the
handle clockwise
until it locks.
An incorrect position of the lters
can cause bad washing results
and damage to the appliance
Cleaning the lter of the inlet hose
1
Close the water tap.
2
A
Disconnect the hose.
Turn the fastener A
clockwise.
3
Clean the lter of
the inlet hose.
4
ENGLISH 23