IKEA FORNEBO - Using the Cooktop; Safe Activation and Pot Detection; Safety Shut Down and Heat Indicator; Cooktop Operation Steps

USING THE COOKTOP
Before you begin, it is important to know:
All functions of this cooktop are designed to
comply with the most stringent safety
regulations.
For this reason:
- Some functions will not be activated, or will
be automatically deactivated, in the absence
of pots on the burners or when they are
poorly positioned.
- In other cases the activated functions will
be automatically deactivated after a few
seconds, if the specific function requires a
further setting that has not been selected
(e.g.: “Turn the cooktop on” without
“Selecting the cooking zone” and the
“Operating temperature”, or the “Lock
Function” or the “Timer” function).
WARNING: Please note! In the case
(for example) of prolonged use, the cooking
zone may not immediately shut down be-
cause it is in the cooling phase; the “
” sym-
bol will appear on the cooking zone display,
to indicate the execution of this phase. Wait
for the display to turn off before approach-
ing the cooking zone.
Cooking zone display
The following is shown on the cooking zone
displays:
Cooking zone on
Power Level
Residual Heat Indicator
Pot Detector
Temperature Manager Function active
Child Lock Function active
Pause function
Automatic Heat UP function
CHARACTERISTICS OF THE COOKTOP
• Safe Activation
The product is activated only in the presence
of pots on the cooking zone: the heating
process does not start or is interrupted if
there are no pots, or if these are removed.
• Pot Detector
The product automatically detects the
presence of pots on the cooking zones.
• Safety Shut Down
For safety reasons, each cooking zone has a
maximum operating time, which depends on
the power level set.
• Residual Heat Indicator
When switching off one or more cooking
zones, the residual heat is indicated with a
specific visual signal on the display of the
corresponding zone by the "
" symbol.
COOKTOP OPERATION
Note: Before activating any functions, the
desired zone must be activated
• Power-on
Press (touch) ON/OFF(1) cooktop/extractor.
The indicator light will turn on to indicate
that the cooktop/extractor is ready for use
Press again to turn off
Note: This function has priority over the
others.
• Selecting the cooking zone
Touch (press) the ON/OFF symbol (22)
corresponding to the cooking zone you
intend to use, then press the Selection bar
(3).
• 9 Power Levels
The cooktop features 9 power levels
14
ENGLISH