disables Bluetooth functionality. Use a 3.5mm
3-pol Audio cable for this feature.
Charging the speaker
When battery is low a red LED (1) will ash.
During charging the red LED is on.
To charge connect the speaker (4) with the
MicroUSB cable to a USB charging device or
with an USB adapter to a power outlet.
Factory reset
Press button (1) 10 sec at start up. This deletes
all paired Bluetooth devices.
Safety and important note
WARNING:
— Risk of overheating! Never install the product
in a conned space. Always leave a space
of at least 5 mm around the product for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on the
product.
— Never place the product or batteries near
open ames or other heat sources, including
direct sunlight.
— Only use this product indoors. The apparatus
shall not be exposed to dripping or splashing,
no objects lled with liquids, such as vases,
shall be placed on the apparatus.
— Never place this product on other electrical
equipment.
IMPORTANT!
— The speaker is for indoor use only and can
be used in temperatures ranging from 0º C
to 40º C.
— Do not leave the speaker in direct sunlight or
near any heat source, as it may overheat.
5
To Next Page
Loading...
