IKEA FROSLUNDA - Product Description and Initial Setup; Initial Setup Before First Use

8 ENGLISH
To download the full version visit www.ikea.com
Product description
3
7 8
9 10
11
4
5
6
1
2
12
1 Salt container 7 Cutlery tray
2
Detergent dispenser
8
Upper basket
3 Lower spray arm 9 Cup shelf
4
Filters
10
Upper spray arm
5
Rinse aid dispenser
11
Lower basket
6 Rating plate 12 Salt funnel
Before first use
1. Make sure the water supply is perfectly clean and water inlet and outlet are well
connected.
2. Make sure that the current level of the water softener agrees with the hardness of the
water supply. If not, adjust the level of the water softener.
3. Fill the salt container and rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing residuals that can still be inside the
appliance. Do not use detergent and do not load the baskets.
After starting a programme, it may take up to 5 minutes for the appliance to
recharge the resin in the water softener. It seems that the appliance is not working.
The washing phase starts only after this procedure is completed. The procedure is
repeated periodically.