ENGLISH 9
To download the full version visit www.ikea.com
Filling the salt container
1 2 3
Find the salt container at the
bottom.
Remove the cap of the salt
container.
Fill the salt container to the
maximum level with water.
Place the supplied funnel over the
mouth of the salt container, then
put1.5 kg of salt in the container.
4 5
SALT
Tightly close the cap of the salt
container.
Caution!
Use rough salt designed for dishwashers only. Fine salt increase the risk of
corrosion. The salt is used to recharge the resin in the water softener and to assure good
washing results in daily use.
Caution!
Water and salt may come out of the salt container when you fill it. After you fill
the salt container, immediately start a programme to prevent corrosion.
To Next Page
Loading...
