Using microwave bottom glass plate
Caution! Use the microwave
bottom glass plate only with
microwave function. Remove the
accessory when you switch to
another function e.g. grilling.
Warning! The microwave bottom
glass plate can become hot when
the appliance operates.
Use the microwave bottom glass plate
whenever the microwave function is on. It is
necessary for heating food or liquids.
Put the accessory on the bottom of the
cavity. Put the food on the microwave
bottom glass plate.
Microwave functions
Functions Description
Microwave Creates the heat directly in the food. Use it to heat pre-prepared
meals and drinks, to defrost meat or fruit, and to cook vegetables
and fish.
Combi Use it to operate the heating function and the microwave mode to-
gether. Use it to cook food in a shorter time and brown it simultane-
ously.
The maximum power for this function is 600 W
Quick Start Use it to activate the Microwave function with one touch of the sym-
bol with the maximum microwave power. Operating time: 30
seconds.
Setting the Microwave function
1. Activate the appliance.
2. Touch to activate the Microwave
function.
3. Touch . The function: Duration is set
to 30 seconds and the microwaves starts
to operate.
Each touch of adds 30
seconds to the time of the
function: Duration.
If you do not touch , the
appliance deactivates after 20
seconds.
4. Touch to set the function: Duration.
Refer to "Setting the clock functions".
When the time of the function:
Duration is longer than 7 minutes
the Microwave power is
decreased to 600 W.
The maximum setting of the time
for the function: Duration is 90
minutes.
You can change the microwave
power (touch and then or )
and the function: Duration
any time when the Microwave
function operates.
5. When the set time ends, an acoustic
signal sounds for 2 minutes. The
Microwave function deactivates
ENGLISH 20