What to do if the display shows an error code on my IKEA Oven?
If your IKEA oven displays an error code not listed, it indicates an electrical fault. First, deactivate the oven using the house fuse or safety switch in the fuse box, then reactivate it. If the error code reappears, contact an Authorised Service Centre.
Why doesn't the water boil in the cavity embossment of my IKEA SMAKSAK?
If the water in the cavity embossment of your IKEA oven isn't boiling, make sure the temperature is set to at least 110 °C.
Why my IKEA SMAKSAK does not heat up?
Your IKEA oven might not be heating up because it is deactivated, so activate the oven. Also, check if the clock is not set and set it. Ensure that the necessary settings are correct. It is also possible that the automatic switch-off is activated. Another potential cause is that the fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. Finally, the Child Lock may be on.
What to do if water comes out of the cavity embossment in IKEA oven?
If water comes out of the cavity embossment in your IKEA oven, it means there is too much water in it. Deactivate the oven and wait until the appliance is cold. Wipe the water with a cloth or sponge. Add the correct amount of water to the cavity embossment. Refer to the specific procedure.
Why is there steam and condensation in my IKEA SMAKSAK?
Steam and condensation may appear in your IKEA oven if you leave dishes inside for too long after cooking. Avoid leaving food in the oven for more than 15-20 minutes after the cooking process ends.
What to do if the IKEA SMAKSAK door is locked?
If the IKEA Oven door is locked, it might be due to a power cut. Check the power supply to resolve this issue.
How to fix the core temperature sensor on my IKEA SMAKSAK Oven?
If the core temperature sensor of your IKEA oven isn't working, it might be because the plug isn't fully inserted into the socket. Push the plug of the core temperature sensor as far as possible into the socket.
Why is there condensation in my IKEA SMAKSAK Oven?
If you see steam and condensation settling on the food and inside your IKEA oven, it's likely because you're leaving dishes in the oven too long after cooking. To prevent this, don't leave dishes in the oven for more than 15-20 minutes after the cooking process finishes.
What does error code C2 mean on my IKEA Oven?
If your IKEA Oven displays 'C2', you're trying to start the Pyrolysis or Defrost function without removing the core temperature sensor plug from the socket. Remove the core temperature sensor plug from the socket.
What to do if the IKEA SMAKSAK display shows ---°C?
If your IKEA oven display shows '---°C', it means you're trying to set the microwave function while the door is open, or the microwave function is set with 0 Watt. Close the door, return to the off position, and reset the microwave function.
Safety guidelines for children and vulnerable individuals.
General safety precautions for using the appliance.
Instructions for safely installing the appliance.
Guidelines for safe electrical connections to the appliance.
Precautions and guidelines for using the appliance.
Information on the pyrolytic cleaning function for oven maintenance.
Instructions for assembling the appliance.
Detailed steps for electrical installation.
Steps for cleaning the appliance before its first use.
Explanation of various heating functions.
Procedure to select and set a heating function.
Instructions for using the meat probe for cooking.
Guide to diagnose and resolve common oven problems.
General| Type | Built-in oven |
|---|---|
| Color | Stainless steel |
| Energy class | A |
| Width | 59.5 cm |
| Height | 59.5 cm |
| Oven type | Electric |
| Volume | 72 liters |
| Functions | Convection, grill |
To Next Page
