What to do if the display shows an error code on my IKEA Oven?
If your IKEA oven displays an error code not listed, it indicates an electrical fault. First, deactivate the oven using the house fuse or safety switch in the fuse box, then reactivate it. If the error code reappears, contact an Authorised Service Centre.
Why doesn't the water boil in the cavity embossment of my IKEA SMAKSAK?
If the water in the cavity embossment of your IKEA oven isn't boiling, make sure the temperature is set to at least 110 °C.
Why my IKEA SMAKSAK does not heat up?
Your IKEA oven might not be heating up because it is deactivated, so activate the oven. Also, check if the clock is not set and set it. Ensure that the necessary settings are correct. It is also possible that the automatic switch-off is activated. Another potential cause is that the fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. Finally, the Child Lock may be on.
What to do if my IKEA SMAKSAK Oven display shows "F102"?
If your IKEA Oven displays "F102", it means the door may not be fully closed or the door lock is defective. Ensure the door is completely closed. If the error persists, try deactivating the oven using the house fuse or safety switch in the fuse box, then reactivate it. If "F102" reappears, contact an Authorised Service Centre.
Why is there steam and condensation in my IKEA SMAKSAK?
Steam and condensation may appear in your IKEA oven if you leave dishes inside for too long after cooking. Avoid leaving food in the oven for more than 15-20 minutes after the cooking process ends.
How to fix the core temperature sensor on my IKEA SMAKSAK Oven?
If the core temperature sensor of your IKEA oven isn't working, it might be because the plug isn't fully inserted into the socket. Push the plug of the core temperature sensor as far as possible into the socket.
Why is there condensation in my IKEA SMAKSAK Oven?
If you see steam and condensation settling on the food and inside your IKEA oven, it's likely because you're leaving dishes in the oven too long after cooking. To prevent this, don't leave dishes in the oven for more than 15-20 minutes after the cooking process finishes.
What to do if my IKEA Oven display shows ---°C?
If your IKEA oven display shows '---°C', it means you're trying to set the microwave function with the door open or with the microwave function set at 0 Watt. Close the door if it's open, return to the off position, and reset the microwave function.
What to do if the IKEA SMAKSAK display shows ---°C?
If your IKEA oven display shows '---°C', it means you're trying to set the microwave function while the door is open, or the microwave function is set with 0 Watt. Close the door, return to the off position, and reset the microwave function.
Why does steam and condensation settle on food in my IKEA SMAKSAK?
Steam and condensation may settle on the food and in the cavity of your IKEA oven because you left the dish in the oven for too long. To prevent this, do not leave dishes in the oven for longer than 15-20 minutes after cooking ends.
General| Type | Built-in oven |
|---|---|
| Color | Stainless steel |
| Energy class | A |
| Width | 59.5 cm |
| Height | 59.5 cm |
| Oven type | Electric |
| Volume | 72 liters |
| Functions | Convection, grill |
To Next Page
