What does it mean if my IKEA SMAKSAK display shows an error code that is not in the manual?
If your IKEA Oven display shows an error code not listed in the manual, it indicates an electrical fault. To resolve this, deactivate the oven using the house fuse or the safety switch in the fuse box, then reactivate it. If the error code persists, contact an Authorised Service Centre.
How to fix '---°C' on my IKEA Oven display?
The display shows '---°C' if you try to set the microwave function on your IKEA oven while the door is open, or if the microwave function is set to 0 Watt. Close the door if it is open, return to the off position, and then reset the microwave function.
What to do if my IKEA Oven display shows ---°C?
If your IKEA oven display shows '---°C', it means you're trying to set the microwave function with the door open or with the microwave function set at 0 Watt. Close the door if it's open, return to the off position, and reset the microwave function.
Why does steam and condensation settle on food in my IKEA SMAKSAK?
Steam and condensation may settle on the food and in the cavity of your IKEA oven because you left the dish in the oven for too long. To prevent this, do not leave dishes in the oven for longer than 15-20 minutes after cooking ends.
What to do if the IKEA SMAKSAK display shows ---°C?
If your IKEA oven display shows '---°C', it means you're trying to set the microwave function while the door is open, or the microwave function is set with 0 Watt. Close the door, return to the off position, and reset the microwave function.
Why is the water in the cavity embossment not boiling in my IKEA SMAKSAK?
If the water in the cavity embossment of your IKEA oven isn't boiling, the temperature is likely too low. Set the temperature to at least 110 °C.
Why is the lamp turned off in my IKEA Oven?
If the lamp in your IKEA oven is off, it's normal behavior when the Eco Fan Cooking function is active. Consult the 'Heating Functions' section in the 'Daily Use' chapter for more details.
What does it mean if my IKEA SMAKSAK Oven display shows an error code not in the manual?
If your IKEA Oven displays an error code not listed in the manual, it indicates an electrical fault. Deactivate the oven using the house fuse or the safety switch in the fuse box, then reactivate it. If the error code reappears, contact an Authorised Service Centre.
What to do if my IKEA SMAKSAK display shows F102?
If your IKEA Oven display shows 'F102', it means the door was not fully closed or the door lock is defective. First, fully close the door. If the error persists, deactivate the oven using the house fuse or safety switch in the fuse box, then reactivate it. If 'F102' reappears, contact an Authorised Service Centre.
What to do if my IKEA SMAKSAK Oven does not heat up?
If your IKEA oven isn't heating up, there could be several reasons: * The oven might be deactivated, so activate it. * The clock might not be set, so set the clock. * The settings might be incorrect, so ensure they are correct. * The door might not be fully closed, so close it completely. * A fuse might be blown, so check the fuse. If it continues to blow, contact a qualified electrician.
General| Type | Built-in oven |
|---|---|
| Color | Stainless steel |
| Energy class | A |
| Width | 59.5 cm |
| Height | 59.5 cm |
| Oven type | Electric |
| Volume | 72 liters |
| Functions | Convection, grill |
Safety guidelines for children and vulnerable individuals.
General safety precautions for using the appliance.
Instructions for safely installing the appliance.
Guidelines for safe electrical connections to the appliance.
Precautions and guidelines for using the appliance.
Information on the pyrolytic cleaning function for oven maintenance.
Instructions for assembling the appliance.
Detailed steps for electrical installation.
Steps for cleaning the appliance before its first use.
Explanation of various heating functions.
Procedure to select and set a heating function.
Instructions for using the meat probe for cooking.
Guide to diagnose and resolve common oven problems.
To Next Page
