Why is the water in the cavity embossment not boiling in my IKEA SMAKSAK?
If the water in the cavity embossment of your IKEA oven isn't boiling, the temperature is likely too low. Set the temperature to at least 110 °C.
What to do if the IKEA SMAKSAK display shows ---°C?
If your IKEA oven display shows '---°C', it means you're trying to set the microwave function while the door is open, or the microwave function is set with 0 Watt. Close the door, return to the off position, and reset the microwave function.
Why does steam and condensation settle on food in my IKEA SMAKSAK?
Steam and condensation may settle on the food and in the cavity of your IKEA oven because you left the dish in the oven for too long. To prevent this, do not leave dishes in the oven for longer than 15-20 minutes after cooking ends.
Why is my IKEA Oven not heating up?
There are several reasons why your IKEA oven might not be heating. First, ensure the oven is activated and the clock is properly set. Check that the necessary settings are correctly configured. Also, the automatic switch-off feature could be activated. If the child lock is on, disable it. Finally, check the fuse; if it continues to blow, contact a qualified electrician.
How to fix '---°C' on my IKEA Oven display?
The display shows '---°C' if you try to set the microwave function on your IKEA oven while the door is open, or if the microwave function is set to 0 Watt. Close the door if it is open, return to the off position, and then reset the microwave function.
What does it mean if my IKEA SMAKSAK display shows an error code that is not in the manual?
If your IKEA Oven display shows an error code not listed in the manual, it indicates an electrical fault. To resolve this, deactivate the oven using the house fuse or the safety switch in the fuse box, then reactivate it. If the error code persists, contact an Authorised Service Centre.
Why doesn't the water boil in my IKEA Oven's cavity embossment?
If the water in the cavity embossment of your IKEA Oven doesn't boil, the temperature is likely too low. Set the temperature to at least 110 °C.
Why is the Direct Steam function not working well on my IKEA SMAKSAK?
If you're experiencing poor cooking performance with the Direct Steam function on your IKEA Oven, make sure you've activated the Direct Steam function and filled the cavity embossment with water. Refer to "Activating the func- tion: Direct Steam" for guidance.
What does "C3" mean on my IKEA SMAKSAK Oven display?
If your IKEA Oven shows "C3" on the display, it indicates that the cleaning function isn't working. This could be because the door isn't fully closed or the door lock is defective. Ensure the door is fully closed.
How to fix the core temperature sensor on my IKEA SMAKSAK Oven?
If the core temperature sensor of your IKEA oven isn't working, it might be because the plug isn't fully inserted into the socket. Push the plug of the core temperature sensor as far as possible into the socket.
Safety guidelines for children and vulnerable individuals.
General safety precautions for using the appliance.
Instructions for safely installing the appliance.
Guidelines for safe electrical connections to the appliance.
Precautions and guidelines for using the appliance.
Information on the pyrolytic cleaning function for oven maintenance.
Instructions for assembling the appliance.
Detailed steps for electrical installation.
Steps for cleaning the appliance before its first use.
Explanation of various heating functions.
Procedure to select and set a heating function.
Instructions for using the meat probe for cooking.
Guide to diagnose and resolve common oven problems.
General| Type | Built-in oven |
|---|---|
| Color | Stainless steel |
| Energy class | A |
| Width | 59.5 cm |
| Height | 59.5 cm |
| Oven type | Electric |
| Volume | 72 liters |
| Functions | Convection, grill |
To Next Page
