Problem Possible cause Solution
The compressor operates
continually.
Temperature is set incor-
rectly.
Refer to "Operation" chapter.
The compressor operates
continually.
Many food products were
inserted at the same time.
Wait a few hours and then
check the temperature again.
The compressor operates
continually.
The room temperature is
too high.
Refer to climate class chart on
the rating plate.
The compressor operates
continually.
Food products placed in
the appliance were too
warm.
Allow food products to cool to
room temperature before stor-
ing.
The compressor operates
continually.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The compressor operates
continually.
The Fast Freezing Function
is switched on.
Refer to "Fast Freezing Func-
tion".
The compressor does not
start immediately after start-
ing Fast Freezing Function,
or after the change of the
temperature.
This is normal, no error has
occurred.
The compressor starts after
some time.
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the
compressor.
Attach the melting water outlet
to the evaporative tray.
Temperature cannot be set. The Fast Freezing Function
is switched on.
Switch off Fast Freezing Func-
tion manually, or wait until the
function deactivates automati-
cally to set the temperature.
Refer to "Fast Freezing Func-
tion".
DEMO appears on the dis-
play.
The appliance is in demon-
stration mode.
Keep the Mode pressed for
approximately 10 seconds un-
til a long sound is heard and
display turns off for a short
time.
The temperature in the ap-
pliance is too low/too high.
The temperature regulator
is not set correctly.
Set a higher/lower tempera-
ture.
ENGLISH 17
To Next Page
Loading...
