Troubleshooting
Warning! Refer to Safety
chapters.
What to do if...
Problem Possible cause Solution
The appliance does not op-
erate.
The appliance is switched
off.
Switch on the appliance.
The appliance does not op-
erate.
The mains plug is not con-
nected to the mains socket
correctly.
Connect the mains plug to the
mains socket correctly.
The appliance does not op-
erate.
There is no voltage in the
mains socket.
Connect a different electrical
appliance to the mains socket.
Contact a qualified electrician.
The appliance is noisy. The appliance is not sup-
ported properly.
Check if the appliance stands
stable.
Acoustic or visual alarm is
on.
The cabinet has been re-
cently switched on or the
temperature is still too
high.
Refer to "High Temperature
Alarm".
Acoustic or visual alarm is
on.
The door is left open. Close the door. Refer to "Door
Open Alarm".
Acoustic or visual alarm is
on.
The temperature in the ap-
pliance is too high.
Contact a qualified electrician
or contact the nearest Author-
ised Service Centre.
A rectangular or square
symbol is shown instead of
numbers on the Tempera-
ture Display.
Temperature sensor prob-
lem.
Contact the nearest Author-
ised Service Centre (the cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
The lamp does not work. The lamp is in stand-by
mode.
Close and open the door.
The lamp does not work. The lamp is defective. Contact the nearest Author-
ised Service Centre.
ENGLISH 16