Daily Use
Adjusting the heat setting
Function Knob setting
Turn clockwise to increase 1 - 9
Turn anti-clockwise to reduce 9 - 1
Turn to 0 switch off 0
Hints and tips
Noises during operation
When a cooking zone is switched
on, it may hum briefly. This is a
characteristic of all ceramic glass
cooking zones and does not
impair either the function or the
life of the appliance.
Energy saving
• If possible, always place lids on the pans.
• Place cookware on the cooking zone
before you switch it on.
• The bottom of the cookware should be
as thick and flat as possible.
• Switch cooking zones off before the end
of the cooking time, to take advantage
of residual heat
• Bottom of pans and cooking zones
should be the same size.
Care and cleaning
General information
Warning! Switch the appliance
off and let it cool down before
you clean it.
Warning! For safety reasons, do
not clean the appliance with
steam blasters or high-pressure
cleaners.
Warning! Sharp objects and
abrasive cleaning agents will
damage the appliance. Clean
the appliance and remove the
residues with water and washing
up liquid after each use. Remove
also the remnants of the cleaning
agents!
Scratches or dark stains on the
glass ceramic that cannot be
removed do not affect the
functioning of the appliance.
ENGLISH 9
To Next Page
Loading...
