ENGLISH 9
5. Make sure the internal selector
“Extractor /Filter“ is set to “Filter“.
6. Refi t the extractor grille or grease fi lter.
To remove the charcoal fi lter proceed in
reverse order.
Lamp maintenance
1. Disconnect the hood from the power
supply.
2. Open the extractor grille or remove the
self-supporting grease fi lter.
3. Remove the burnt-out lamp. Use 28W
max. halogen E14 lamps only.
4. Refi t the extractor grille or grease fi lter.
IMPORTANT: make sure you don’t touch the
lamp with your bare hands.
To Next Page
Loading...
