What to do if...
PROBLEM POSSIBLE CAUSE SOLUTION
Appliance not stable.
The appliance is not correctly
installed.
Respect the Installation instruction
enclosed to the appliance.
Appliance is not in horizontal
position.
The appliance is not correctly
installed.
Respect the Installation instruction
enclosed to the appliance.
Performance in terms of oil
capture arent satisfying.
Oil and grease on metal lters.
Respect the cleaning frequency of
lters as described in the user manual.
Appliance doesn't work.
The appliance is not correctly
connected.
Verify that the main cable is
connected to the motor group or the
plug is connected to the socket.
The lamp is not working. The lamp is not correctly xed.
Verify that the lamp is screwed
properly to the lampholder.
The lamp is not working. The lamp is faulty. Replace the lamp bulb.
If there is a fault, first try to find a solution to the
problem yourself. If you cannot find a solution
to the problem yourself, contact an authorized
service center.
If you operated the appliance wrongly, or
the installation was not carried out
according to the Assembly instructions, the visit
from the After Sales Service technician may not
take place free of charge, even during the
warranty period.
To Next Page
Loading...
Need help?
General
