IKEA RENLIG FWM7 - Final Checks and Technical Specifications; Pre-Service Checks and Data Recording

Problem Possible cause Solution
The correct temperature was not
selected.
Check if you have selected the cor-
rect temperature.
Excessive laundry load. Reduce the laundry load in ac-
cording to the "Washing Pro-
grammes table".
After the check, switch on the appliance
and press the button 5 to restart the pro-
gramme.
If the malfunction shows again, contact your
After Sales Service.
The necessary data for the service centre is
on the rating plate. We recommend that
you write the data here:
Model description
(MOD): .....................
21552
© Inter IKEA Systems B.V. 1999
Made In Italy
000.000.00
Product number (PNC): ...........................
Serial number (S.N.): ...............................
Technical data
Dimensions Width (cm) 59,6
Height (cm) 84,5
Depth (cm) 63,6 max.
Water supply pressure
1)
Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Cotton max. load (kg) 7
Max. spin speed (rpm) 1600
Energy class A++
Washing class A
Spinning class A
Washing noise (dB(A)) 55
Spinning noise (db(A)) 79
Average annual energy
consumption (kWh)
2)
210
ENGLISH 24