1 2
1 2
21
ENGLISH
MAINTENANCE
Remove a presser foot
1. Turn the hand wheel towards you to move the needle into the highest po-
sition. Lift the presser foot.
2. Press the lever on the back of the presser foot holder to release the
presser foot. Do not apply force to remove the presser foot.
Attach a presser foot
1. Position the presser foot so that the pin on the foot is directly
under the groove in the presser foot holder. Lower the presser foot hold-
er.
2. When you lift the presser foot holder again, the foot will be
securely attached.
To Next Page
Loading...
